Diaphragm pumps must be located vertically to an horizontal installation surface, so that on the same time the exchanger shaft to be positioned horizontally.

Installations:

Recommended viscosity per application:
Drum transfer (with max viscosity 10000 cps)
Self-priming (with max viscosity 10000 cps)
Under head (with max viscosity 50000 cps)
Immersed (with max viscosity 50000 cps)
Twin suction and delivery manifold (with max viscosity 50000 cps)
Twin delivery manifold (with max viscosity 50000 cps)

Pump, self -priming

ADB BOXER air operated diaphragm pumps are dry self priming. Depending on the pump specification a suction lift of up to 9 mWC can be achieved with a filled suction pipe

Pump with positive suction

Depending on the pump type the suction side inlet pressure must be limited to max 0.7 bar . In this case a valve is required to isolate the suction pipe

Pump, Submerged

ADB BOXER air operated diaphragm pumps can be totally submerged in the pumped medium. The chemical compatibility of the pump material must be checked beforehand . The exhaust outlet must remain above the fluid level.

Pumps for drums

ADB BOXER air operated diaphragm pumps can be directly mounted on drums or containers . For ease of use the pump is mounted on the container complete with adapter. The suction pipe is supplied the pump.

Twin suction and delivery manifold

Twin delivery manifold